There is mineral staining at the fitting on the back of the refrigerator
As moisture readings guide drying, a white or green crust at the compression fitting marks where water has been weeping.
Source of the water
Idaho
Our water-damage technicians cleans up refrigerator supply-line leaks, including moisture hidden beneath flooring, cabinets, baseboards, and adjoining walls.
Signs to look for
As moisture readings guide drying, if you notice any of these problems, call us before water has more time to spread into nearby materials.
As moisture readings guide drying, a white or green crust at the compression fitting marks where water has been weeping.
Through the final dry check, the wet area takes the shape of the appliance because that is where the water lands.
From the source check, a restricted or partly split line delivers less water to the tray than it should.
To control the wet boundary, a short click and hum with nobody at the fridge means water is going somewhere.
To control the wet boundary, polyethylene tubing gets crushed when a refrigerator is pushed back into place.
To control the wet boundary, piercing valves are a common ice maker connection and a common failure point.
What happens
Our water-damage technicians adjusts the work to what got wet, how far the water traveled, and which materials can be saved.
To control the wet boundary, the refrigerator valve may be behind the unit, under the sink or on a pipe in the basement.
To control the wet boundary, the unit comes forward slowly on floor protection so nothing gets dragged across a cupped board.
As moisture readings guide drying, a moisture meter walks the rectangle under and behind the unit, and a thermal imaging camera flags the cool areas worth checking.
As moisture readings guide drying, we separate the shutoff valve, the run of tubing, the compression fitting at the appliance and the dispenser tube.
From the source check, there is rarely standing water on a leak like this.
To control the wet boundary, panels pull moisture up through the boards instead of removing them.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
What to expect
From the source check, here is how we usually handle fridge line leak cleanup near Idaho.
As moisture readings guide drying, look behind the unit first, then under the kitchen sink, then on the cold pipe in the basement or crawl space.
Your callThrough the final dry check, turning the ice maker off stops the appliance calling for water it will only lose again.
+5 minutesFrom the source check, if it is already pulled out, leave it out.
+15 minutesFrom the source check, the lead checks the valve, the tubing run, the fitting at the appliance and the dispenser line separately.
On arrivalAs moisture readings guide drying, the refrigerator comes forward and the rectangle underneath is read for the first time.
First hours on siteFrom the source check, wood that is worth saving goes on a mat drying system immediately.
Same dayFrom the source check, air movers work the opened area and the mat system while an Professional dehumidifier takes the moisture out of the air.
Before we leaveUnderstanding the cost
As moisture readings guide drying, we explain the recommended work and price before you approve the job. As moisture readings guide drying, these examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Refrigerator line leak found quickly, hard flooring behind the unit | From the source check, national estimate. Through the final dry check, unit moved, footprint extracted and dried over two to three days. | $500 to $1,500 |
| Slow line leak found months later, flooring opened and subfloor dried | From the source check, national estimate. As moisture readings guide drying, underlayment removal, subfloor drying and four to six drying days. | $1,500 to $4,500 |
| Long running leak that reached the adjoining room, with flooring removal | From the source check, national estimate. From the source check, multiple work areas, flooring removal and disposal, extended monitoring. | $2,500 to $7,000 |
| Hardwood floor panel drying system with monitoring, per room | From the source check, national estimate. From the source check, used where the wood floor is worth saving rather than replacing. | $1,500 to $5,000 |
| Open plan or multiple rooms of wood floor on a mat system | From the source check, national estimate. From the source check, used where one continuous floor carried the leak well past the kitchen. | $3,500 to $9,000 |
| Refrigerator line cleanup priced by affected area, clean water | From the source check, national estimate. As moisture readings guide drying, measured wet area, which starts at the appliance footprint. | $3 to $7 per square foot |
| Remove and replace solid hardwood, per square foot | As moisture readings guide drying, national estimate for the rebuild side, quoted by a flooring contractor rather than by us. | $8 to $20 |
| After hours dispatch on its own | From the source check, national estimate. As moisture readings guide drying, the premium for a night, weekend or holiday response. | $100 to $400 |
How long the line leaked
Days means drying the footprint and moving on. Months means underlayment, subfloor and possibly the whole flooring run are in the drying plan.
Flooring type
As moisture readings guide drying, tile is the easy case and generally stays.
Whether the wood floor can be saved
From the source check, mat drying costs more per room up front and far less than replacement.
How far the water traveled under the floor
To control the wet boundary, a footprint is one work area.
Subfloor condition under the appliance
Through the final dry check, a plywood deck that got wet for weeks usually dries.
Access behind the unit
To control the wet boundary, built in and counter depth units in a cabinet surround are slow to move and slow to work around.
Why timing matters
To control the wet boundary, water can keep moving into nearby materials even when the surface looks dry.
As moisture readings guide drying, the volume per hour is tiny and the volume per season is not.
As moisture readings guide drying, refrigerators are heavy, plumbed and wedged between cabinets.
Through the final dry check, water enters the unfinished underside, so the edges swell more than the face.
From the source check, a loaded refrigerator concentrates several hundred pounds on four small feet.
Helpful service information
From the source check, start with the short explanation. To control the wet boundary, open a card if you want a little more detail.
Through the final dry check, it starts at a shutoff valve, which on older installations is often a saddle valve clamped onto a copper pipe with a piercing needle.
To control the wet boundary, the water path behind a refrigerator is short and has four weak points.
To control the wet boundary, when a refrigerator is pushed back into place, the extra loop of tubing gets folded against the wall and pinched.
Through the final dry check, the failure most people never see coming is a crush. To control the wet boundary, when a refrigerator is pushed back into place, the extra loop of tubing gets folded against the wall and pinched.
To control the wet boundary, water lands on the finish floor and works into whatever seam or unfinished edge it can find.
Through the final dry check, the damage is all about the floor, because that is the only thing under the leak.
Help near you
Choose your area below, or call (877) 734-0262 and describe what happened.
You may also need
Our water-damage technicians cleans up water from sinks, dishwashers, refrigerators, and supply lines while drying cabinets, flooring, and adjoining rooms.
Get a Quote: (877) 734-0262Our water-damage technicians cleans up water from failed appliances, checks hidden spread, and dries cabinets, walls, and flooring around the leak.
Get a Quote: (877) 734-0262Our water-damage technicians extracts water from hardwood flooring and uses controlled drying to reduce cupping, warping, and moisture trapped below the boards.
Get a Quote: (877) 734-0262Our water-damage technicians removes surface water and dries moisture trapped beneath finished flooring to protect the subfloor and surrounding materials.
Get a Quote: (877) 734-0262Our water-damage technicians cleans up plumbing leaks and overflows, removes standing water, and dries walls, floors, cabinets, and nearby rooms.
Get a Quote: (877) 734-0262Our water-damage technicians cleans up dishwasher leaks and overflows, including water hidden beneath cabinets, flooring, and nearby wall assemblies.
Get a Quote: (877) 734-0262Our water-damage technicians uses moisture readings and targeted inspection to locate hidden leaks and define how far the water has spread.
Get a Quote: (877) 734-0262Our water-damage technicians uses meters and thermal imaging to find hidden moisture, mark affected areas, and guide a focused drying plan.
Get a Quote: (877) 734-0262Common questions
Through the final dry check, look behind the unit first, then under the kitchen sink, then on the cold pipe in the basement.
Through the final dry check, months is normal and a year is not unusual. As moisture readings guide drying, the water lands under an appliance nobody moves, so nothing visible ever appears in the room.
As moisture readings guide drying, most commonly the plastic tubing gets kinked when the unit is pushed back, then splits at that spot later.
From the source check, generally yes, and copper is also a solid choice. Through the final dry check, braided stainless resists the crushing that kills plastic tubing behind an appliance.
To control the wet boundary, it is a piercing valve clamped onto a pipe to tap it for the ice maker.
To control the wet boundary, usually not. To control the wet boundary, ice or water in the freezer floor is normally a blocked defrost drain, which is an appliance issue rather than a water loss.
Through the final dry check, every six months is a reasonable habit. Through the final dry check, close the shutoff first, move the unit slowly, and look at the fitting and the floor in good light.
Talk with a restoration specialist
Describe the source, the impacted rooms, and when you first noticed the damage.
Areas we serve
Our water-damage technicians trace homes, businesses, and managed properties throughout Idaho and nearby communities.
View the area on Google Maps